10673 Microsoft Office Record Navigation Control 10.0
10675 Microsoft Office
10676 908
10677 This Technical Beta copy of Microsoft Office Web Components 10.0 has expired. Install the retail version or obtain an updated beta release from Microsoft.
10678 Microsoft Office Chart
10679 Microsoft Office Spreadsheet
10680 Microsoft Office Data Source Control
10681 Microsoft Office PivotTable List
10682 Write Conflict
14000 Column %1!d! (%2)
14001 Column %1!d!
14002 Sheet
14006 Width: |0 (|1 pixels)
14007 Height: |0 (|1 pixels)
14008 Width: |0 - Hide column(s)
14009 Height: |0 - Hide row(s)
14010 Column: |0
14011 Row: |0
14012 |0C
14013 |0R
14014 New Sheet
14015 Book1
14016 DataSheet
15000 The selected range cannot be sorted because it contains both merged and unmerged cells, or because the merged cells are not the same width and height.
15001 Nonblank cells cannot be shifted off the spreadsheet.
15002 The viewable range "|0" is not valid.
15003 The viewable range "|0" partially intersects a merged cell.
15004 The entire viewable range cannot be deleted from the spreadsheet.\n\nSelect fewer cells and try again.
15005 This object is no longer valid.
15006 Inside horizontal borders cannot be applied to the current selection.
15007 Inside vertical borders cannot be applied to the current selection.
15008 Range is invalid.
15009 Column width must be between 0 and 255.
15010 Row height must be between 0 and 409.
15011 Cannot change part of a merged cell
15012 |0 has the same parameter list as Microsoft Excel, but cannot support the following non-default parameter value(s):\n|1
15013 \n |0 = |1; must be omitted or equal to |2.
15014 \n |0 = |1; must be omitted.
15015 Cannot insert or delete partial row(s). Entire row(s) must be selected.
15016 Cannot insert or delete partial column(s). Entire column(s) must be selected.
15017 Cannot insert or delete partial rows or columns.
15018 Parameter contains a value only supported in Excel.
15510 The text given is not a valid hyperlink.
15511 The cell does not contain a hyperlink.
15512 The information cannot be pasted because the cut or copy area is not the same size as the paste area.\n\nClick one cell and then try pasting again.
15513 The information cannot be pasted because the paste area is not completely on the spreadsheet.\n\nPaste into a different cell or try inserting more columns or rows into the spreadsheet.
15514 The property is invalid for this type of event.
15518 The selected cells cannot be merged. The range partially intersects a merged cell.
15519 AutoSum cannot insert a formula.\n\nSelect the data for which you want totals and ensure that there is a blank row or column for the result.
15520 Each BeginUndo method requires a corresponding EndUndo.
15521 The range you are trying to select is not completely in the viewable range.
15522 Edit control creation has failed. You cannot edit cells.
15523 No list was found. Select a single cell within your list, and then use the AutoFilter command again.
15524 Data cannot be imported from URL |0.\n\nMake sure you have specified a valid path.
15525 Columns cannot be inserted or deleted in a filtered list.\n\nTurn off AutoFilter and then try again.
15526 There is no AutoFilter range on the worksheet.
15527 Data cannot be imported from URL or file |0.\nThe data is not on the same host computer as your current document, or the data has been copied from another host computer.
15528 Data cannot be loaded from this file.
15529 An AutoFilter range cannot contain merged cells.
15530 Data cannot be loaded. Check that this is a supported environment.
15531 The file contains data or formulas that may not be supported. This may affect calculations.
15532 There was an error loading and data may have been truncated. The amount of data may be too large, or it may not be a valid HTML table.
15533 Data cannot be cut from a filtered list, and rows cannot be deleted when a list is filtered.\n\nTo clear cells in a filtered list, use the Delete key. To cut cells in a filtered list, copy and paste them and then clear the copied cells with the Delete key.
15534 A control on this page is unsafe for use in a formula.
15535 You cannot select multiple sheets. Group mode is not supported.
15536 A workbook must contain at least one visible worksheet. To hide, delete, or move the sheet(s), you must first insert a new sheet or unhide a sheet that is already hidden.
15537 Workbook is protected and cannot be changed.
15538 Cannot rename a sheet to the same name as another sheet.
15539 While renaming a sheet, you entered an invalid name. Make sure the name does not exceed 31 characters. Make sure the name does not contain any of these characters: / \ ? * [ ]. Make sure you did not leave the name blank.
15540 You cannot delete a very hidden sheet.
15542 Unable to get the Next property of the Range class.
15543 Unable to get the Previous property of the Range class.
15544 Array formulas are not valid in merged cells.
15546 No cells were found.
15547 You cannot change part of an array.
15548 Invalid maximum width or maximum height. Please specify a number of pixels or a percentage from 1% to 100%.
15549 Data binding failed. The data source provided no further information. The most common cause of this is binding to a datasource that cannot provide a Recordset.
15550 This operation requires the merged cells to be identically sized.
15700 Rows cannot be resized. Row resize protection is currently enabled.
15701 Columns cannot be resized. Column resize protection is currently enabled.
15702 Rows cannot be inserted. Row insertion protection is currently enabled.
15703 Columns cannot be inserted. Column insertion protection is currently enabled.
15704 Rows cannot be deleted. Row deletion protection is currently enabled.
15705 Columns cannot be deleted. Column deletion protection is currently enabled.
15706 Cells cannot be sorted. Sort protection is currently enabled.
15707 Filters cannot be created or removed at this time. Filter protection is currently enabled.
15708 The Commands and Options dialog box cannot be displayed. The Commands and Options dialog box display protection is currently enabled.
15709 Custom headers cannot be modified. Header protection is on.
15750 The range you are trying to modify is locked and therefore read-only.
15751 Cannot find the data you are searching for.
15752 The sheet is protected and cannot be changed.
16000 Undo
16001 Cut
16002 Copy
16003 Paste
16004 AutoFilter
16005 Sort Ascending
16006 Sort Descending
16008 Commands and Options
16009 Help
16010 AutoSum
16011 Microsoft Office Spreadsheet
16013 Refresh All
16014 Delete Selection
16015 Commands and Options
16016 Undo
16017 Help
16018 Show/Hide Legend
16019 Refresh
16020 By Row/Column
16021 Sort Ascending
16022 Sort Descending
16023 AutoFilter
16024 AutoCalc
16025 Expand
16026 Collapse
16027 Drill Into
16028 Field List
16029 Chart Type
16030 Chart Wizard
16031 Drill Out
16200 The formula you typed contains an error.\n\nFor information about fixing common formula problems, see Help.\n\nIf you are not trying to enter a formula, avoid using an equals sign (=) or minus sign (-), or precede it with a single quotation mark (').
16201 #DIV/0!
16202 #VALUE!
16203 #NAME?
16204 #NULL!
16205 #CIRC!
16206 #NUM!
16207 #REF!
16208 #N/A
16209 TRUE
16210 FALSE
16211 HYPERLINK
16212 CHOOSE
16213 IF
16214 SUM
16215 SUBTOTAL
16217 Formula is too long.
16300 The Microsoft Office Spreadsheet Component could not load the XML data.\n\n|0
16301 A <|0> tag is not allowed inside a <|1> element.
16302 "|0" is not a legal value for the |1 attribute of the <|2> element.
16303 |0 is not an attribute for the <|1> element.
16304 </|0> is not the correct tag to close the <|1> element.
16305 |0 is not a legal value for the cell when the data type is |1.
16306 The merged cell at |0 exceeds the sheet boundaries declared in the <Table> tag.
16307 The merged cells at |0 and |1 overlap.
16308 The number of rows specified in the table does not match the number declared in the <Table> tag.
16309 The number of columns specified in the table does not match the number declared in the <Table> tag.
16310 The row with index value |0 is out of order. Check that it does not overlap the previous row's span.
16311 The column with index value |0 is out of order. Check that it does not overlap the previous column's span.
16312 The cell with index value |0 is out of order. Check that it does not overlap the previous cell's merge area.
16313 There are closing tags missing from the end of the document.
16314 There are styles that share a name or an ID.
16315 An XML Spreadsheet document must have a <Workbook> tag as its root node, not a <|0> tag.
16316 A <Row> element with a Span attribute greater than 0 may not contain <Cell> elements
16317 The parent style '|0' for style '|1' either does not exist or is not defined before '|1'.
16318 A <|0/> entity is not allowed inside a <|1> entity.
16319 The <|0> entity requires a '|1' attribute.
16320 The <|0> entity requires a <|1> entity.
16321 The <Borders> collection may only have one <Border> entity for each position.
16323 The attribute '|0' appears more than once on a '|1' entity.
16324 The style with identifier '|0' is not defined.
16325 The merged cells '|0' overlap the merged cells '|1'.
16326 Only one <|0> entity is allowed inside a <|1> entity.
16327 An XML document may only contain one top level entity.
16328 No <Column> entities may occur after <Row> entities.
16329 You cannot paste past the last worksheet in the book.
16330 An XML Spreadsheet document must contain a <Workbook> tag as its root node.
16331 The document is not a well-formed XML file.
16332 |0 is not a legal value for the |1 option in the <|2> element.
16333 Rich text markup tags are only allowed in a <Data> entity when the type is 'RichText'
16334 The formula '|0' in cell |1 contains a syntax error or is not supported by the Spreadsheet component.
16335 The formula '|0' for name '|1' contains a syntax error.
16336 A cell with the data type |0 must have a value.
16340 The Microsoft Office Spreadsheet component could only partially load the XML data.\n\n|0
16341 There are more rows in the XML than the spreadsheet component can hold.
16342 There are more columns in the XML than the spreadsheet component can hold.
16343 The name '|0' is used more than once.
16345 The name '|0' is invalid.
16346 The cell at |0 lies inside a merged range.
16347 A formula or sheet you want to move or copy contains the name '|0', which already exists on the destination worksheet. Do you want to use this version of the name?\nTo use the name as defined in the destination sheet, click Yes.\nTo create a new name for this formula or sheet, click No.
16350 XML Files*.xmlHTML Files*.htm;*.htmlCSV Files*.csvAll Files*.*
16351 (hidden)
16352 &Hide
16353 &Unhide
16354 Any data in the selected sheet will be permanently deleted. Continue?
16355 (Sheet)
17011 No
17012 Yes
17013 False
17014 True
17015 Off
17016 On
17017 <Binary Data>
17018 There were errors. Click here for details.
17021 The selection contains multiple values. Merging the selection into one cell will keep the value in the upper-left cell only.
17022 The selection contains multiple values. Merging the selection into one cell will keep the value in the upper-right cell only.
17023 ##
17024 ##
17025 ##
17026 ##
17027 ##
17028 ##
17029 ##
17030 ##
17031 ##
17032 ##
17033 ##
17034 ##
17035 ##
17036 ##
17037 ##
17038 ##
17039 ##
17040 ##
17041 ##
17042 ##
17043 ##
17044 ##
17045 ##
17046 ##
17047 ##
17048 ##
17049 ##
17050 ##
17051 ##
17052 ##
17053 Command is disabled.
17054 The Commands and Options dialog box cannot be displayed from a Microsoft Office Web Component that is in a modal dialog or form.
17055 Unable to navigate to "|0".
17056 Menu is not properly structured.
17100 Commands and Options
17101 A %1 in this file was saved with a more recent version of the Microsoft Office Web Components than the version installed on your computer. When you click OK, the %2 will be converted to the earlier format. If you resave the file, the %2 will then be saved in the format of the version you are using.
17102 PivotTable list
17103 PivotTable list
17104 Chart
17105 Chart
17106 Spreadsheet
17107 Spreadsheet
17108 data source control
17109 data source control
17110 Properties
17501 Out of memory.
17502 Invalid argument.
17503 Invalid number format.
17505 Nothing to Undo.
17506 Invalid property value.
17507 Office Web Components that are created in client-side script cannot connect to data sources.
17508 An error 0x|0 occurred. No further information was provided.
17509 The data entered is not valid for this property.
18001 Axis Scaling couldn't be resolved.
18002 Category axis not linked to proper category.
18003 Graph Tag is missing required Tags: Type or Scaling.
18004 ColorIndex tag is used without a Palette tag present.
18005 ColorIndex value is out of range.
18006 SplitScale tag missing Maximum and/or Minimum.
18007 SplitScale Maximum is smaller than the Minimum Tag.
18008 Error
18009 Could not parse |0 as a color.
18010 In the |0 collection, the |1 tag requires a value.
18011 Chart Workspace Title
18012 Chart Title
18013 Axis Title
18014 In the |0 collection, we did not parse the |1 tag correctly because the value |2 was not recognized.
18015 Axis tag is missing required tags: AxisID, ScaleID, Type or Placement.
18016 Trendline Error
18017 This object is no longer valid.
18018 Series
18019 This program is attempting to save |0 to your hard drive. If you have an existing file of the same name on your hard drive, it will be overwritten. Are you sure you want to save |0 to your hard drive?
18020 The file |0 could not be opened for export.
18021 The user canceled the operation.
18023 DataSource specified in Data collection is out of bounds
18024 Error
18025 Error
18026 ErrorBars tag is missing required Tag: BarType, ErrorType
18027 Legend Entry is missing required Tag: Index
18028 Error
18029 Error
18030 Error
18031 The specified dimension is not valid for the current chart type.
18032 Unknown graphics filter type.
18033 Invalid literal data format. Literal data must be specified either as an array, or a tab-delimited string.
18034 External data source failed to connect.
18035 When calling SetData on a PivotTable, you must use a constant from ChartPivotDataReferenceEnum when using chDimSeriesNames or chDimCategories. When specifying values, you must use a numeric aggregate index.
18037 Warning
18038 A size must be specified for the exported image.
18039 The spreadsheet reference must be 1 row or 1 column.
18040 The datasource index is invalid.
18041 In Chart.SetData, literal data may only be to specify chDimSeriesNames or chDimCategories.
18042 Retrieving Data...
18043 Loading...
18045 Invalid Parameter
18046 A chart may have at most 16 axes.
18047 This property is not used by category axes.
18048 This axis has no crossing axis.
18049 This object has no title.
18050 This object has no legend.
18051 This property is not valid for the current chart type.
18052 A Chart Workspace may contain at most 64 charts.
18053 A series may only have 256 sets of data labels.
18054 This property is read-only once the data source is bound.
18055 A series may only have a single set of error bars.
18056 A logarithmic scale may only contain positive values.
18057 This scale has no log base.
18058 This data source is of an unknown or invalid type.
18059 The title of an axis may not be moved.
18060 A series may only have up to 256 trendlines.
18061 Linear
18062 Poly.
18063 Expon.
18064 Power
18065 Log.
18066 A Chart may only have up to 256 series.
18067 A series name cannot be bound to a recordset or a PivotTable list. Use Chart.SetData instead.
18068 The given ADO Recordset must be set to client cursor and must not be forward only reading.
18069 The DataSource object is not a recognized type.
18070 A category axis does not support number formats.
18071 3D Charts require DirectX 7. This chart will be viewed as a 2D chart.
18072 Failed to load texture from file
18073 Failed to load preset texture
18074 This property is not used by value axes.
18075 Cannot apply total function, reverting to count of elements
18076 per. Mov. Avg.
18077 Chart Field List
18078 Drag items to the Chart
18079 Filter Area
18080 Series Area
18081 Category Area
18082 Data Area
18083 Y Data Area
18084 X Data Area
18085 Open Data Area
18086 Close Data Area
18087 High Data Area
18088 Low Data Area
18089 Bubble Data Area
18090 R Data Area
18091 Theta Data Area
18096 Format Data Area
18097 MultiChart Area
18100 Surface charts can not be loaded.
18101 Cannot change chart attributes in an event handler
18102 Failed to get data. If available, errors returned from the provider are listed below.
18103 A Format Map may only have up to 256 segments.
18768 This is an inappropriate time to alter layout.
18770 Microsoft Office Web Components
18771 This program is about to run an unsafe COM object of type: |0. Are you sure you want to do this?
18772 [Totals]
18773 Field Button
18774 Drop Data Fields Here
18775 Drop Y Data Fields Here
18776 Drop X Data Fields Here
18777 Drop Open Data Fields Here
18778 Drop Close Data Fields Here
18779 Drop High Data Fields Here
18780 Drop Low Data Fields Here
18781 Drop Bubble Data Fields Here
18782 Drop Radius Data Fields Here
18783 Drop Theta Data Fields Here
18788 Drop Format Data Fields Here
18789 Series
18790 Categories
18791 Multi-Chart
18792 Invalid Position
18793 Value
18794 Y
18795 X
18796 Open
18797 Close
18798 High
18799 Low
18800 Size
18801 R
18802 Theta
18803 Can't unify scales. All of the charts must have compatible types.
18804 Can't add automatically created date hierarchies here.
18805 Bubble size must be between 0 and 300.
18806 Series or category information may not have been retained while converting this chart to the latest version. For best results, it is recommended that you recreate the chart.
18807 Office Web Components cannot open data sources on Web servers. Please copy the data source to a local or network file share.
20000 Edit Menu
20001 Export to Microsoft Excel
20002 Refresh
20003 Cancel refresh
20004 Sort Ascending
20005 Sort Descending
20006 AutoFilter
20007 AutoCalc
20008 Subtotal
20009 Move To Row Area
20010 Move To Column Area
20011 Move To Detail
20012 Move To Filter Area
20013 Promote
20014 Demote
20015 Collapse
20016 Expand
20017 Help
20018 Show Top/Bottom Items
20019 Show As
20020 Sum
20021 Count
20022 Avg
20023 Max
20024 Min
20025 StdDev
20026 Any
20027 Group
20028 Of
20029 Of
20037 Commands and Options
20038 Copy
20039 Field List
20040 Hide Details
20041 Show Details
20042 Calculated Totals and Fields
21000 The PivotTable list "|0" cannot be opened. The required information is damaged or missing.\n\nConsult the creator of the file, or check for errors by opening the PivotTable list in the program that was used to create the file.
21001 Not all information could be loaded for the PivotTable list "%1". To rectify the problem, missing data has been replaced by default values. If the results are not satisfactory, consult the creator of this file or Web page.
21002 Details:
21007 The PivotTable list "|0" could not connect to the data source "|1". For information about the data source, consult the creator of the file.
21008 The PivotTable list "|0" could not connect to the data source. For information about the data source, consult the creator of the file.
21009 Cannot export the PivotTable list to Microsoft Excel because no data connection is active.\n\nClick OK, click the Refresh button on the toolbar, and then try exporting again.
21010 Cannot find Microsoft Excel. Excel is not installed or not installed correctly.\n\nClick OK, install and run Excel, and then try exporting again.
21011 Cannot export to the installed version of Microsoft Excel. Exporting requires Excel 2000 or later.\n\nClick OK, install and run Excel 2000 or later, and then try exporting again.
21012 Could not create or save the file.\n\nClick OK, and make sure that space is available and that you have permission to save files on the location you specified. Then try exporting again.
21013 The path is too long.\n\nClick OK, and then try exporting to a location that has a shorter path.
21014 Cannot start Microsoft Excel.\n\nClick OK, and make sure you can run Excel. If you can't, uninstall and then reinstall Excel. Then try exporting again.
21015 Microsoft Excel does not support PivotTable reports that are based on queries with parameters. When you export this PivotTable list, a copy of the data will be used in the Excel PivotTable report.
21016 Totals in this PivotTable list include data that is hidden by filtering. When you export this PivotTable list to Microsoft Excel, the totals in the Excel PivotTable report will not include the hidden data, and as a result the total values in the Excel report will be different.
21017 Totals in this PivotTable list do not include data that is hidden by filtering. When you export this PivotTable list to Microsoft Excel, the totals in the Excel PivotTable report will include the hidden data, and as a result the total values in the Excel report will be different.
21018 The data source does not support totalling only visible items.
21019 In the |0 collection, we did not load the |1 tag correctly because the value "|2" was not recognized or is invalid.
21020 The filtering saved for "|0" could not be loaded.
21021 The PivotTable is invalid because the FieldSet "|0" has no bound field.
21022 The user-defined fieldset '|0' could not be loaded. |1
21023 The user-defined field '|0' could not be loaded. |1
21024 The calculated total '|0' could not be loaded. |1
21025 The total '|0' could not be loaded. |1
21026 The fieldset '|0' has no included fields. At least one must be included.
21027 The conditionally filtered field '|0' appears between the conditionally filtered field '|1' and its filter context '|2'. Fields between a conditionally filtered field and its filter context cannot be conditionally filtered.
21028 This PivotTable list uses features that are different to or not supported in Microsoft Excel, and as a result values in the Excel report may be different.
21029 The PivotTable is unable to perform Top/Bottom filtering on custom grouping fields. The field you are attempting to filter, '|0', is a custom grouping field.
21030 The PivotTable is unable to perform Top/Bottom filtering when the filter context field is a custom group field. The context field, '|0', is a custom grouping field. Remove field '|0' from the Axis and try again.
21031 The Top/Bottom filtering context field '|0' is hidden, while the field above it, '|1' , is a custom group field. Field above a hidden context field can not be a custom group field. Drag field '|0' back on to the Axis or remove field '|1' and try again.
21032 Field below a hidden Top/Bottom filtered field can not be a custom group field. The Top/Bottom filtered field '|0' is hidden, while the field below it, '|1', is a custom group field. Drag field '|0' back on to the Axis or remove field '|1' and try again.
21033 The custom group field '|0' appears between the Top/Bottom filtered field '|1' and its filter context '|2'. Fields between a Top/Bottom filtered field and its filter context cannot be custom group field. Turn off filtering and try again.
21034 The PivotTable is unable to create custom groups on a Top/Bottom filtered field. The field you are attempting to group, '|0', is Top/Bottom filtered. Turn off the filtering and try again.
21035 The PivotTable is unable to create custom groups between a Top/Bottom filtered field and its context. The field you are attempting to group, '|0', is between a Top/Bottom filtered field, '|1', and its context, '|2'. Turn off filtering and try again.
21036 The PivotTable is unable to create custom groups below a hidden Top/Bottom filtered field. The field you are attempting to group, '|0', is below a hidden Top/Bottom filtered field, '|1'. Drag field '|1' back on the Axis and try again.
21037 The next field, '|1', is a custom group field, removing the Top/Bottom filtered field, '|0', from the Axis is not allowed. Remove field '|1' first, and then try again.
21038 Field above a hidden Top/Bottom filtering context field can not be a custom group field. You are trying to remove field '|0', which will leave a custom group field, '|1', above a hidden Top/Bottom filtering context field, '|2'. Please make sure field '|2' is on the Axis or you can remove field '|1'.
21039 Top/Bottom filtering context field can not be a custom group field. You are trying to remove field '|0', which will leave a custom group field, '|1', as the context field of the Top/Bottom filtered field '|2'. Remove field '|1' or turn off filtering and try again.
21040 The PivotTable is unable to perform Top/Bottom filtering when the filter context is a custom group field. Field '|1' is Top/Bottom filtered with default context, and the field you are trying to add to the axis, custom group field '|0', is not allowed to become the context of the filtering. Turn off filtering and try again.
21041 Field above a hidden Top/Bottom filtering context field can not be a custom group field. You are trying to add custom group field '|0' to axis, which is right above field '|2', the context of the filtered field '|1'. Drag field '|2' back on the Axis or turn off filtering and try again.
21042 The autoshow setting for field '|0' could not be loaded. The context field, |1, is a custom group field.
21043 The autoshow setting for custom group field '|0' could not be loaded. Autoshow setting on a custom group field is not supported.
22040 Web Pages*.htm;*.html;*.htx;*.asp;*.alx;*.stm;*.shtmlAll Files*.*
22041 Export to Microsoft Excel (Excel not found)
22051 Grand Total *
22064 Total
22065 Grand Total
22066 Missing related field
22067 Expr|0
23045 Row Area
23046 Column Area
23047 Filter Area
23048 Data Area
23049 Detail Data
23050 Drag items to the PivotTable list
23051 (Show All)
23052 (Blanks)
23053 (All)
23054 (Blank)
23055 (NonBlank)
24000 Drop Totals or Detail Fields Here
24001 Drop Row Fields Here
24002 Drop Column Fields Here
24003 Drop Filter Fields Here
24004 No data source specified.
24005 Unable to connect to data.
24006 The query could not be processed:
24007 Unable to get detail data.
24015 (|)
24016 0
24017 Calculated|
24018 No Totals
24019 No Details
24020 Connecting to data source...
24025 "Qtr"#
24026 |0 - |1
24027 Details not available.
24028 Detail references must be from the same cell.
24029 Method or property not available on this object instance.
24030 Property or argument requires a column member.
24031 Property or argument requires a row member.
24032 Cannot create a total against a cube provider.
24033 Only user-defined or calculated totals can be deleted.
24034 Object does not belong to this pivottable.
24035 Cannot insert fieldset on data axis when connected to a cube provider.
24036 Only user-defined fieldsets can be deleted.
24037 Only used-defined totals can be modified.
24038 Function cannot be applied to the given field.
24039 Cannot create a total of a field of a multi-field fieldset.
24040 Retrieving data for the PivotTable list may take a significant amount of time and memory. Do you want to continue?
24041 Query Incomplete.
24042 Object required.
24043 Query canceled. Press F9 to restart the query and display data.
24044 Canceling query...
24045 Cannot sort fields of this type.
24046 Cannot pivot or filter binary fields.
24047 The ConnectionString property must be set before the CommandText property.
24048 The QueryComplete event invalidated the query.
24049 Member has no children.
24050 Data
24051 yyyy
24052 mmm
24053 dd-mmm
24054 hh
24055 mm:
24056 ss
24058 yyyy "<FE Year>"
24059 mmm "<FE Month>"
24060 dd "<FE Day>" mmm "<FE Month>"
24061 hh "<FE Hour>"
24062 mm "<FE Minute>"
24063 ss "<FE Second>"
24064 [=1]"JFM";[=2]"AMJ";[=3]"JAS";[=4]"OND"
24065 The PivotTable control cannot copy more than 18,278 columns or 250,000 rows at a time.
24070 <|0
24071 >|0
24072 >=|0
24073 dddd
24074 dddd "<FE Day>"
24120 Sum of |0|1
24121 Count of |0|1
24122 Min of |0|1
24123 Max of |0|1
24124 Average of |0|1
24125 Standard Deviation of |0|1
24126 Variance of |0|1
24129 Standard Deviation Population of |0|1
24130 Variance Population of |0|1
24131 The data provider didn't supply any further error information.
24132 |1 - |0
24133 :
24134 Drop Page Fields Here
24135 Click here to connect to data
24136 The field is read only.
24137 This value cannot be edited.
24138 The new value was not accepted.
24139 ...
24140 |0 (|1)
24141 Value: |0\nTotal: |1
24142 Total for |0
24143 \n|0: |1
24144 |0 (|1 of |2)
24145 |0 (|1)
24146 |0
24147 |0 (|1)
24148 -
24149 \nFilter: |0 = |1
24159 Showing only the top |0 items
24160 Showing only the top |0 items based on |1
24161 Showing only the bottom |0 items
24162 Showing only the bottom |0 items based on |1
24163 Showing only the top |0% of items based on |1
24164 Showing only the bottom |0% of items based on |1
24165 Showing only the top items that add up to |0
24166 Showing only the bottom items that add up to |0
24169 Show/Hide Details
24170 Total|0
24171 (Multiple Items)
24172 Other
24173 Excluding: |0
24174 \nRow Member: |0
24175 \nColumn Member: |0
24176 Row
24177 Column
24178 Page
24179 Selected members must have the same parent.
24180 A total member cannot be multi-selected.
24181 New Total|
24182 Cannot drill into a total member.
24183 Invalid argument, only plFindFormatPathName and plFindFormatPathInt are supported.
24184 Invalid argument, only plFindFormatPathName is supported.
24200 Sum
24201 Count
24202 Min
24203 Max
24204 Average
24205 Standard Deviation
24206 Variance
24209 Standard Deviation Population
24210 Variance Population
24211 Group
24500 All
24510 |0 By Week
24511 |0 By Month
24512 |0 Synthetic
24520 Years
24521 Quarters
24522 Months
24523 Weeks
24524 Days
24525 Hours
24526 Minutes
24527 Seconds
24530 Empty
24531 Non Empty
24540 Cube
25001 My Computer's Data Sources
25002 Add New Data Source
25003 ODBC File Data Sources
25021 Totals
25022 Year
25023 Quarter
25024 Month
25025 Week
25026 Day
25027 Hour
25028 Minute
25029 Second
25033 Custom Query
25050 Total *
26000 There is no default recordset.
26001 Warning: You have modified data and not saved changes. If you click OK, your changes will be discarded.
26002 The "|0" object can not be found.
26003 You must set the ListRowSource property first.
26004 This property does not apply to this element's type.
26005 You must bind the element to a field first.
26006 The |0 command failed.
26007 Can't filter records. The field name specified in the GroupFilterField property must contain values that have the same or a compatible data type as the values in the group filter control.
26008 An attempt has been made to access an object which has been deleted.
26009 An object named "|0" already exists.
26010 Invalid operation.
26011 The SQL statement could not be created or contains no output columns.
26012 The intended operation can not be completed. Either the action has no required relationship or too many relationships apply.
26013 An internal error occurred in the data definition of the page.
26014 An error occurred trying to use "|0". Check to see that the object exists.
26015 Execute is only allowed on a recordset that is at the top level of a hierarchy.
26016 The value "|0" is not a valid collection index.
26017 Cannot generate a unique name.
26018 An attempt has been made to use a schema relationship which either does not exist or does not apply to the operation involved.
26019 More than one relationship applies to this operation.
26021 The field "|0" cannot be found in the "|1" rowsource.
26023 Cannot use Group By Table when a higher group level exists for the current group level.
26024 Cannot promote the only table out of a recordsetdef.
26026 Cannot demote this field, table, or query.
26027 The invoked method is not applicable to this type of pagefield object.
26030 Cannot delete "|0". You cannot delete a PageRowSource that has dependent PageRowSources. Delete the dependent PageRowSources first.
26031 Cannot delete "|0". You cannot delete a RecordsetDef that has dependent RecordsetDefs. Delete the dependent RecordsetDefs first.
26032 Lookups can only be created to the primary rowsource of a recordsetdef.
26033 You cannot bind a section to multiple record sources if one of the record sources is a parameterized query.
26034 Multiple lookups to the one side pagerowsource "|0" are not allowed.
26035 The lookup pagerowsource "|0" cannot contain a sublist.
26036 A sublist cannot be created for this recordset.
26037 The recordset "|0" already contains a parent.
26038 To create a sublist, the recordsets must have a one-to-many relationship.
26039 Databinding...
26040 Cannot show Footer for lowest Group Level.
26042 This property cannot be set if there are Group Levels.
26045 Property not available before connection is established.
26046 This DataPage has no GroupLevel.
26047 GroupOf|0
26048 Data Error
26049 Command not available.
26050 "|0"
26051 An unspecified data generation error occurred.
26052 To create a sublist, the recordsets of both the parent and child must be based on command files.
26053 The lowest Group Level does not expand.
26054 Invalid relationship. A recordset can't have more than one parent.
26055 The name "|0" contains invalid characters.
26056 The name "|0" contains invalid characters.
26057 Totals not allowed on this field.
26058 You cannot bind controls in the Caption or Record Navigation section.
26059 Expr|0
26060 Command|0
26061 XMLFile|0
26062 The ControlSource property does not apply to GroupFilterControls
26063 Failed to retrieve a recordset for the Data Encapsulation operation. Check to make sure the page is bound to at least one recordset.
26064 The Data Encapsulation operation failed.
26065 Cannot Encapsulate data when the page is being browsed.
26066 You are about to delete one or more records. If you click Yes you won't be able to undo this delete operation. Are you sure you want to delete these records?
26067 The expression "|0" is not valid.
26068 The expression "|0" cannot contain any references to the names of other calculated fields.
26069 Property not available in this mode.
26070 You can refresh server-side meta-data only in page Design view.
26071 The UseRemoteProvider property is supported only for pages saved to Web folders.
26072 Property cannot be set in this mode.
26073 <!-- Begin IE4 Message in HTML --><style>a:link {font:9pt/12pt verdana; color:red}a:visited {font:9pt/12pt verdana; color:blue}</style><TABLE style="background-color:white"><TR><td id="tableProps" width=70 valign=top align=center><SPAN style="width: 30; height: 30;border: outset 2 white"><center><font color=mediumblue family=arial size=6><b>i</b></center></font></span></TD><TD valign=center width=400><h1 id="textSection1" style="font:14pt/16pt verdana; color:#4e4e4e">This page cannot be properly displayed </h1><font style="font:9pt/12pt verdana; color:black"><br>This data access page requires features available in Microsoft Internet Explorer version 5.0 (or later).<hr size=1 color="blue">You may download the latest version of Microsoft Internet Explorer from <a href="http://officeupdate.microsoft.com/office/redirect/10/owcieins.asp?HelpLCID=0x|0">Microsoft Internet Explorer</A> or by contacting your system administrator.</FONT></TD></TR></TABLE><!-- End IE4 Message in HTML -->
26074 The data source you selected might be empty, might be linked with an invalid link, or you may not have sufficient security permissions to access the data.
26076 Cannot rename "|0".
26077 You can rename only fields that are in tables and views.
26078 The field you specified in the ListBoundField property of the group filter control '|0' has a data type of Memo, Long Text, or Binary. You can't filter records by using a field with one of these data types.
26079 The GroupInterval property is available only for a GroupingDef.
26080 The GroupOn property is available only for a GroupingDef.
26081 Cannot change a section's RecordSource property when the section contains a grid or when other group levels exist.
26082 The GroupHeader or GroupFooter property must be set to Yes before you can set the DataPageSize property.
26083 #Name?
26084 The value you typed isn't valid for the TotalType property. Valid values are Sum, Avg, Min, Max, Count, Any, StDev, Var, StdDevP, VarP.
26085 An expression with the name you typed already exists on this page. Type a unique name.
26086 A GroupLevel for that RecordSource already exists.
26087 An ElementExtension for that element already exists.
26088 DataEntry mode is not allowed in Data Access Pages with repeating sections.
26089 Command not available in Data Access Pages with repeating sections.
26090 Cannot set DataPageSize to a value other than 1 when there are elements on the page with ConsumesRecordset=TRUE.
26092 Microsoft Access groups on every control in a group level that was created with the Promote button. The control you added to the group header or footer for this group level is bound to a field of one of the following data type that can't be grouped: in a Microsoft Access database (.mdb), a Memo or OLE Object data type; or, in a Microsoft Access project (.adp), a binary, varbinary, or text data type.\n\nRecreate the group level again by using Group By Table or add the control to a lower group level.
26093 The DefaultSort property is invalid.
26094 Property not available.
26095 Invalid operation. This data provider is unsupported.
26096 The selected pagerowsource can not be promoted across the parent grouping section. Demote all parent grouping sections then retry the promote.
26097 The pagerowsource "|0" is the primary pagerowsource and can not be deleted. To remove it you must delete the section.
26098 The groupingdef "|0" can not be deleted because in has one ore more dependant groupingdefs.
26099 This field can not be deleted because it is required for a relationship.
26100 No value provided for one or more parameters
26101 The expression field "|0" contains field references from more than one section which must be removed before the promote can be completed.
26102 This field can not be deleted because it is used in an expression. Try removing it from the expression first.
26103 The required parameters for the query were not provided.
26104 This page has been saved on a web server that is not configured to allow connections to data source |0.
26105 Can't make data connection via this web server. Install the Microsoft Office Server Extensions in order to use data access pages with the remote provider feature.
26106 The remote provider reported an error using Windows NT Integrated security. Either you do not have permission to log on to the database, or the web server cannot delegate your security credentials to the database.
26107 Microsoft Data Access Components
26108 This page accesses data on another domain. Do you want to allow this?To avoid this message in Internet Explorer, you can add a secure Web site to your Trusted Sites zone on the Security tab of the Internet Options dialog box
26109 Safety settings on this machine prohibit accessing a data source on another domain
26110 The data was added or updated in the database, but the data won't be displayed because it doesn't satisfy the criteria in the underlying record source.
26111 This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made. If you do not save the record, your changes will be lost.\n\nSave changes?
26112 You can't update the record because another user or application deleted it, or changed the value of its primary key.
26113 Another user or application has already deleted this record, or changed the value of its primary key.
26114 You cannot enter null expressions.
26115 You can't add a new record or delete an existing record because the recordset for this page is read-only.
26116 Microsoft Data Access Page
26117 Save current data with the page?
26118 Only RecordsetSaveProgress event supports the PercentComplete property.
26119 Microsoft Access Data Pages
26120 Microsoft Office Web Components could not connect to the server, |0.
26121 Microsoft Office Web Components could not open the database '|0'.
26122 |0 is not a root recordset.
26123 Web page |0 is unavailable offline.\n\nTo make this page available offline, connect to the Internet, click the Favorites menu, click Add to Favorites, and then select the Make available offline check box.
26124 <P>Data Access Pages has detected that your IE security settings will not allow you to access data from a site considered to be insecure.</P><P>In order to access the data contained within the Data Access Page, you need to:</P><P>1. Start IE</P><P>2. Choose Internet Options from the Tools menu</P><P>3. Click on the "Security" Tab</P><P>4. Click on the "Trusted Sites" icon</P><P>5. Click on the "Sites..." button</P><P>6. Uncheck the "Require server verification (https) for all sites in the zone" checkbox</P><P>7. Add "<A href=|0>|1</A>" as a trusted server</P><P>8. OK the dialog</P><P>9. Try to open the Data Access Page</P><P>If you still cannot access the data, it is possible that one of the following problems exist.</P><UL> <LI>You do not have security permissions to the <STRONG>server</STRONG> on which the data resides.</LI> <LI>You do not have security permissions to the <STRONG>data</STRONG> referenced in the mail.</LI></UL><P>You should check with the Data Access Page owner to determine if you need other permissions.<BR></P>
26125 The operation was cancelled.
26204 This section cannot be expanded or collapsed.
26205 Name
26206 Value
26207 The section you are attempting to collapse is already collapsed.
26208 The section you are attempting to expand is already expanded.
26209 The section cannot be added.
26210 The section cannot be deleted.
26220 | Property Setting
26221 Create
26222 Delete
26223 Operation
26300 Table: |0
26301 View: |0
26302 Command Text: |0
26303 Procedure: |0
26304 Command File: |0
26308 Query: |0
26309 Recordset: |0
26310 All
26320 First
26321 Previous
26322 Next
26323 Last
26324 New
26325 Delete
26326 Save
26327 Undo
26328 Sort Ascending
26329 Sort Descending
26330 Filter by Selection
26331 Filter Toggle Button
26332 Help
26333 Save All
26334 Undo All
27000 This field can not be deleted because it is the output of a stored procedure, SQL command, or XML data file.
27001 This field can not be deleted because it is last field in a grouping section. Delete the grouping section instead.
27002 This field can not be deleted because a grouping field is dependent on it.
27003 Section containing stored procedure, command text or command files may not be combined with other rowsource types.
27004 When you set the GroupOn property to Month, you must set the GroupInterval property to 1, 2, 3, 4, or 6.
27005 When you set the GroupOn property to Quarter, you must set the GroupInterval property to 1 or 2.
27006 Multiple objects trying to connect at once.
27007 The pagefield "|0" is not a valid aggregate source for this section.
27008 A valid totals type is required for this aggregate to be created.
27009 This field can not be deleted because it is the last field in a pagerowsource. Delete the pagerowsource instead.
27010 An error occurred while trying to open data file "%1". The file may be damaged or missing. Consult the creator of the Web page.
27011 An error occurred while trying to open data file "%1". The file may be damaged or missing. If you save this Web page, the connection to this data file will not be saved.
27012 An error occurred while trying to use a query published from Microsoft Excel. Consult the creator of the Web page.
27013 An error occurred while trying to use a query published from Microsoft Excel. If you save this Web page, this query will not be saved.
27014 Cannot use a stored procedure, query or SQL command that does not have unique names or aliases for all output fields.
27015 An error occurred while trying to load metadata. Check connection and try again.
27016 The original sublist relationship is not correct for this new recordset. Please correct it.
27017 There is no sublist relationship between the current parent and this new recordset. Please correct it.
27018 Field must be of type dscCalculated or dscGrouping.
27019 The TotalType property can be set to Sum, Avg, or Stdev for numeric fields only.
27020 Multiple objects are trying to open a recordset at the same time.
27021 You are going to overwrite an existing file. Do you want to continue?
27022 The current web page has no offline data source.
27023 The operation returned no records and no file can be created. Changing the query or filter may return the results you want.
27024 Error opening data file "|0".
27025 The Jet 3.51 provider is not supported.
27026 The recordset "|0" does not contain records. Check the XML datasource to make sure the recordset exists and contains at least one record.
27027 Could not find the XML dataset with the id "|0" specified in the XMLDataTarget property for this page. You should verify that an XML dataset with this id exists and that the XMLDataTarget property has the correct id.
27028 Could not create any records from the XML document located at "|0". Check to make sure that the document exists, the path to the document is correct, and that you have the appropriate access permissions.
27029 You cannot add, edit, or delete records in a group level that has a grouped field.
27030 The property "|0" is not supported by the data provider.
27031 The property "|0" conflicts with other properties.
27032 The property "|0" has an invalid value.
27033 There was an error setting the property "|0".
27035 XMLDataTarget does not contain a value. ExportXML failed.
27036 Cannot retrieve parameter information for the selected recordset.
27038 ExportXML does not support an HTTP target file at this time.
27039 Invalid group filter control.
27040 The transform xsl could not be applied. Please review the file "|0" for error details.
27041 Cannot instantiate the client-side OLE DB provider for this page. If the page connects to data in a Microsoft Project file, install Microsoft Project. Otherwise, install the latest version of Microsoft Data Access Components or contact the author of this page.
27042 Unable to load the database schema.
27043 Connection failed. Microsoft Office Web Components do not support connecting to Extensible Markup Language (XML) data sources. Please check the Microsoft Developer's Network Web site for more information.
28000 GroupEnd value must be greater than GroupStart value.
28001 GroupInterval value is outside valid range.
28002 You must supply connection or data source information before attempting this operation.
28004 Unable to evaluate expression due to circular reference.
28005 Unable to insert item onto axis.
28006 The calculated total '|0' has the same name as an existing total.
28007 The user-defined fieldset '|0' has the same name as an existing fieldset.
28008 The calculated field '|0' has the same name as an existing field.
28009 The cubename '|0' is invalid.
28010 The value '|0' is invalid or ambiguous. You must use PivotMember objects or PivotMember unique names to set members on this field.
28011 Invalid grouping settings for field '|0'.
28012 The Name parameter must between 1 and 24 characters in length.
28013 Unable to query for further results as the definition of the pivot has changed since the result was created.
28014 The filter context must be a field from the same fieldset.
28015 The filter context must be this field or an ancestor field.
28016 A member passed belongs to the field '|0'. Only members for the field '|1' are allowed.
28017 An error occurred when trying to find the ancestors of the filtered member '|0'. This may have been caused by the use of a ragged hierarchy which is not supported in this version or by setting filtering on the wrong level.
28018 The FilterFunctionValue of field '|0' is not valid for the FilterFunction.
28019 A FilterOn total for field '|0' is needed for the FilterFunction.
28020 The FilterOn total must be a total in this PivotTable list.
28021 The SortOn total must be a total in this PivotTable list.
28022 A custom group member must have at least one child member.
28023 The Before parameter passed in is not a valid index, name or reference to a PivotField within the FieldSet
28024 The PivotTable list cannot load MDX that uses named sets.
28025 The PivotTable list cannot load the MDX. Did not find the expected keyword 'AS' following calculated member name '|0'.
28026 The PivotTable list cannot load the MDX. Invalid solve order value '|0'.
28027 The PivotTable list cannot load the MDX. Invalid or no cube name following the 'FROM' keyword.
28028 The PivotTable list cannot load the MDX. Expected the keyword 'PROPERTIES' following the keyword 'DIMENSION'.
28029 The PivotTable list cannot load the MDX. Expected the keyword 'EMPTY' following the keyword 'NON'.
28030 The PivotTable list cannot load the MDX. Unmatched quotes found.
28031 The PivotTable list cannot load the MDX. Invalid identifier found starting '|0'.
28032 The PivotTable list cannot load the MDX. Expecting '|0' but found '|1' instead.
28033 '|0' is not a custom group member. You may only ungroup custom groups of members.
28034 You cannot group items that belong to different parent items. The items you selected belong to the '|0' and '|1' items of the '|2' field.
28035 The PivotTable list cannot load the MDX. Unable to determine the hierarchy of the calculated member '|0' when searching for the member by unique name or name. Ensure this name is the member's unique name or name.
28036 The PivotTable list cannot load the MDX. The calculated member '|0' is not supported. Only calculated measures are supported in this version. If you need to use a calculated member, define a session calculated member and refer to it on the MDX command.
28037 Unable to evaluate the expression for FieldSet '|0'. Expression: '|1'\n|2
28038 You cannot enter null expressions.
28039 You cannot set the expression on a total or field that is not calculated.
28040 Solve order cannot be negative.
28041 You cannot set the solve order on a total that is not calculated.
28042 The name '|0' is not valid. The name must contain only letters, numbers, space, ( or ).
28043 AlwaysIncludeInCube can only be set when connected to a tabular data source.
28044 Custom grouping is not supported by the data provider. To enable custom grouping the data provider needs to support the creation of session calculated members (MDPROPVAL_MF_CREATE_CALCMEMBERS).
28045 Calculated totals are not supported by the data provider. The creation of calculated totals requires the data provider to support the creation of session calculated members (MDPROPVAL_MF_CREATE_CALCMEMBERS).
28046 Selecting multiple items when in the filter axis is not supported by the data provider. To allow this the data provider needs to support the creation of session calculated members (MDPROPVAL_MF_CREATE_CALCMEMBERS).
28047 An error occurred setting one or more connection string property values.
28048 '|0' is a fall through of its parent member. You should group its parent member instead.
28049 Non of the members you selected to group is found in the database. The PivotTable is unable to group them unless you specify a parent member other than NULL. Choose the parent member for the group and try again.
28050 The total name '|0' is too long.
28051 The name of this total cannot be changed.
28052 The PivotTable list cannot determine the cell with the current record because the datasource is multi-dimensional (OLAP). The current cell can only be returned for relational data sources.
28053 You cannot get cell colors unless PivotTable.DisplayCellColors has been set.
28054 The name of this FieldSet cannot be changed. Only user defined Fieldsets can have their name changed.
28055 The name of this Field cannot be changed. Only user defined Fields can have their name changed.
28056 The PivotTable list cannot display all of the data. One of the reasons could be that the data contains an empty item that has non-empty child items. Either set the option to display empty rows and columns, or alter the data so that there are no empty items with non-empty child items.
29015 Microsoft Office Synchronization Manager 10.0
29016 Microsoft Office Subscription Notification Handler 10.0
29017 Microsoft Office Pluggable Protocol and Name Space 10.0
29018 Microsoft Office Offline Information 10.0
29050 The %s property can't be found for the Offline Favorite.
29051 The operation can't be completed because of insufficient memory.
29052 The Web page %s wasn't loaded.
29053 The synchronization handler couldn't load the SQL Server Merge Replication ActiveX control.
29056 The Microsoft Office Data Source Control wasn't found on page %s.
29057 The Web page data couldn't be taken offline. Microsoft SQL Server 2000 or later is required as the offline data source.
29058 The Web page %s can't be loaded.
29059 The Microsoft Office Data Source Control %s property isn't set.
29060 The Microsoft Office Data Source Control has an invalid OfflineType property value.
29062 The Microsoft Office Data Source Control offline properties have changed since the Web page was taken offline. Delete the Offline Favorite and then add it back.
29063 The Web page data can't be taken offline. The OfflinePublication property value for %s isn't the same as the OfflinePublication property value for %s.
29065 The XML data for the Web page %s wasn't downloaded.
29068 The database %s wasn't created on Microsoft SQL Server %s.
29070 The subscription properties weren't found. Delete the Offline Favorite and then add it back.
29072 The Channel Definition File (CDF) for the Web site contains Web pages with inconsistent offline types. Each Web page must be configured for XML offline or the same Microsoft SQL Server Merge Publication.
29081 Initial schema and data downloaded.
29082 Offline Data Synchronization
29083 The Web page was not selected to be synchronized with the Web page data. Synchronizing the Web page data and not the Web page could result in problems when using the Web page offline.\n\nAre you sure you want to synchronize the Web page data only?
29084 The Web page data was not selected to be synchronized with the Web page. Synchronizing the Web page and not the Web page data could result in problems when using the Web page offline.\n\nDo you also want to synchronize the Web page data?
29085 Downloading the data to a local XML data file.
29086 Offline Web Pages: Data
29087 Initializing data synchronization.
29088 No data is bound to this Web page.
29089 Successfully downloaded XML data.
29092 Downloading data into %s.
29094 Offline Microsoft SQL Server Login
29095 Online Microsoft SQL Server Login
29096 The database %s already exists on Microsoft SQL Server %s. Do you want to overwrite it?
29097 Preparing for data synchronization.
29098 Operation was stopped.
29103 Creating offline database.
29106 Operation was cancelled.
29107 The Web page with a parameterized query can't be taken offline using a local XML data file.
29110 The safety settings on this machine prohibit accessing a data source on another domain. To allow cross domain data access, add this site to IE trusted site list.
29111 The Microsoft SQL Server service can't be started, either because it is disabled or because it has no enabled devices associated with it.
29112 The Web page isn't available offline.\n\nTo make the Web page available offline, connect to the Internet, click the Favorites menu, click Add to Favorites, and then select the Make available offline check box.
29113 That name is not valid.
29114 The Web page data can't be taken offline using Microsoft SQL Server Merge Replication. The online data source must be Microsoft SQL Server 8.0 or greater.
29117 %s Offline Properties
29118 Can't access the internet cache or find cache information for the web page.
29119 \
29120 {
29121 }
29122 ,
29123 ;
29124 1
29125 Some data sets on the page has no records. Offline binding will fail for those pages.
29126 This page cannot be taken offline.
29127 The file specified in the OfflineSource property for this page needs to be a properly formatted XML file with a .xml file extension. Please make any necessary corrections and save the page.
30000 Format
30004 Spreadsheet Format Property Page
30005 General Date
30006 Long Date
30007 Medium Date
30008 Short Date
30009 Long Time
30010 Medium Time
30011 Short Time
30012 Currency
30013 Fixed
30014 Standard
30015 Percent
30016 Scientific
30017 Yes/No
30018 True/False
30019 On/Off
30020 General
30021 Local Currency
30022 Euro Currency
30027 8
30028 9
30029 10
30030 11
30031 12
30032 14
30033 16
30034 18
30035 20
30036 22
30037 24
30038 26
30039 28
30040 36
30041 48
30042 72
30050 Empty
30051 Null
30052 Integer
30053 Long
30054 Single
30055 Double
30056 Currency
30057 Date
30058 Text
30059 IDispatch
30060 Error
30061 Yes/No
30062 Variant
30063 Unknown
30064 Decimal
30065 Byte
30066 Byte
30067 Integer
30068 Long
30069 Big Integer
30070 Big Integer
30071 File Time
30072 Guid
30073 Binary
30074 Text
30075 Text
30076 Numeric
30077 User Defined
30078 Date
30079 Time
30080 Time Stamp
30081 Chapter
30082 File Time
30083 Property Variant
30084 Numeric
30085 Text
30086 Memo
30087 Memo
30088 Memo
30089 Binary
30090 Binary
30091 Lock Cells
30092 Unlock Cells
30093 Undo
30094 Help
30095 BoldItalicUnderlineAlign LeftCenterAlign RightAlign TopAlign MiddleAlign BottomFont Color
30096 Fill ColorMerge CellsUnmerge CellsLock Cells
30715 Use graduated colors to indicate absolute values. Graduate evenly between the smallest value and 0 (or the value you indicate) and graduate evenly between zero (or the value you indicate) and the largest value.
30716 Use graduated colors to indicate relative values. Graduate evenly between the smallest and largest value.
30717 Use two colors to distinguish between values smaller than 0 (or the value you indicate) and larger than 0 (or the value you indicate).
30718 Use a color to represent the smallest values in a range. For example, you could represent the bottom 10% of values as blue.
30719 Use a color to represent the largest values in a range. For example, you could represent the top 10% of values as blue.
31101 Three Point GradientTwo Point GradientTwo Segment SolidBottom ValuesTop Values
31102 Positive ErrorNegative ErrorPositive and Negative Error
31103 End CapsNo End Caps
31115 Chart Type Property Page
31116 Type
31200 Border Color
31201 Dash
31202 Fill Color
31203 Background Color
31204 Fill Pattern
31205 Gradient Style
31206 One Color Gradient
31207 Two Color Gradient
31208 Preset Gradient
31209 Preset Texture
31210 &Sides&Front&Top
31300 Column
31301 Bar
31302 Line
31303 SmoothLine
31304 Pie
31305 XY (Scatter)
31306 Bubble
31307 Area
31308 Doughnut
31309 Radar
31310 Stock
31311 Polar
31401 3D Combo Chart.
31402 Combo Chart.
31403 Clustered Column. Compares values across categories.
31404 Stacked Column. Compares the contribution of each value to a total across categories.
31405 100% Stacked Column. Compares the percentage each value contributes to a total across categories.
31406 Clustered Bar. Compares values across categories.
31407 Stacked Bar. Compares the contribution of each value to a total across categories.
31408 100% Stacked Bar. Compares the percentage each value contributes to a total across categories.
31409 Line. Displays trend over time or categories.
31410 Line with markers displayed at each data value.
31411 Stacked Line. Displays the trend of the contribution of each value over time or categories.
31412 Stacked line with markers displayed at each data value.
31413 100% Stacked Line. Displays the trend of the percentage each value contributes over time or categories.
31414 100% Stacked Line with markers displayed at each data value.
31415 Smooth Line. Displays trend over time or categories.
31416 Smooth Line with markers displayed at each data value.
31417 Stacked Smooth Line. Displays the trend of the contribution of each value over time or categories.
31418 Stacked Smooth Line with markers displayed at each data value.
31419 100% Stacked Smooth Line. Displays the trend of the percentage each value contributes over time or categories.
31420 100% Stacked Smooth Line with markers displayed at each data value.
31421 Pie. Displays the contribution of each value to a total.
31422 Exploded Pie. Displays the contribution of each value to a total while emphasizing individual values.
31423 Stacked Pie. Displays the contribution of each value to a total across multiple data series.
31424 Scatter. Compares pairs of values.
31425 Scatter with data points connected by smoothed lines.
31426 Scatter with data points connected by smoothed lines without markers.
31427 Scatter with data points connected by lines.
31428 Scatter with data points connected by lines without markers.
31429 Filled Scatter. Draws a filled polygon, one per series.
31430 Bubble. Compares sets of 3 values. Like a scatter chart with a third value displayed as the size of the bubble marker.
31431 Bubble Line. Bubble with markers connected by lines.
31432 Area. Displays the trend of values over time or categories.
31433 Stacked Area. Displays the trend of the contribution of each value over time or categories.
31434 100% Stacked Area. Displays the trend of the percentage each value contributes over time or categories.
31435 Doughnut. Like a pie chart, but can contain multiple series.
31436 Exploded Doughnut. Like an exploded pie chart, but can contain multiple series.
31437 Radar without markers. Displays changes in values relative to a center point.
31438 Radar. Displays changes in values relative to a center point.
31439 Filled Radar. Radar with the area covered by a data series filled with a color.
31440 Radar with smooth lines and no markers.
31441 Radar with smooth lines and markers.
31442 High-Low-Close. Requires data series for High, Low, and Close values.
31443 Open-High-Low-Close. Requires data series for Open, High, Low, and Close values.
31444 Polar. Compares the relationship of angles and distances.
31445 Polar with data points connected by lines without markers.
31446 Polar with data points connected by lines.
31447 Polar with data points connected by smoothed lines without markers.
31448 Polar with data points connected by smoothed lines.
31449 3D Column
31450 3D Column Clustered
31451 3D Stacked Column
31452 3D 100% Stacked Column
31453 3D Bar
31454 3D Bar Clustered
31455 3D Stacked Bar
31456 3D 100% Stacked Bar
31457 3D Line
31458 3D Overlapped Line
31459 3D Stacked Line
31460 3D 100% Stacked Line
31461 3D Pie
31462 3D Exploded Pie
31463 3D Area
31464 3D Area Overlapped
31465 3D Stacked Area
31466 3D 100% Stacked Area
31473 Chart Data Sheet Property Page
31474 Data Sheet
31483 &Clear Data Sheet&By Row - By Column&Copy&Paste
31484 Series
31485 Category
31486 Point
31487 Value
31488 Values
31489 Bubble
31490 X Value
31491 Y Value
31492 Theta
31493 Radius
31494 Open
31495 High
31496 Low
31497 Close
31498 Category Label
31500 Day(s)
31501 Week(s)
31502 Month(s)
31503 Quarter(s)
31504 Year(s)
31505 Sum
31506 Count
31507 Min
31508 Max
31509 Average
31510 None
31511 Auto
31512 Manual
31513 Default
32001 New Group
32002 New Group, keep scales
32003 Merge with Group
32004 Top
32005 Bottom
32006 Left
32007 Right
32008 Series
32009 Category
32010 Value
32011 Circular
32012 Radial
32013 PivotChart Totals
32014 Group
32015 Series
32016 Changing the Plot Details setting will clear the drop areas, which could change the number of series in your chart and cause your chart to lose formatting. Continue?
32201 Regular
32202 Calculated
32204 Years
32205 Half Years
32206 Quarters
32207 Months
32208 Weeks
32209 Days
32210 Hours
32211 Minutes
32212 Seconds
32213 Undefined
32214 Unknown
32215 User Defined
32216 Weekdays
32217 Custom Group
32231 Regular
32232 Calculated
32233 User Defined
32240 |0 - |1 (Field)
32241 |0 - |1
32242 |0 (Field)
32243 |0
32250 All items
32251 Top
32252 Bottom
32253 Order in data source
32254 (Automatic)
32260 (No grouping)
32261 Prefix characters
32262 Numeric interval
32263 Years
32264 Quarters
32265 Months
32266 Weeks
32267 Days
32268 Hours
32269 Minutes
32270 Seconds
32281 YYYY
32282 "Qtr"#
32283 MMM
32284 "Week"#
32286 h AM/PM
32287 mm:
32288 ss
32290 None
32291 Report
32292 ScreenTip
32293 All
32294 Property caption
32295 Property value
32296 Up
32297 Down
32300 When grouping by prefix characters, you must set the Interval to an integer.
32301 FilterFunctionValue is outside a valid range.